Production Carousels

We deliver carousels for different stages in the cable production, including  Degassing and Conductor carousels

Our carousels may be delivered in one piece or as a modularized system enabling shipping in standard ISO containers.
The carousels has lifting lugs located underneath the deck plate which enables lifting and relocation of the carousel when not in use.

We also have full range of ancillaries for transport and loading in between production stations.

 

Degassing Carousels

Our degassing carousels is a enclosed system with over pressure continuously circulating the air flow, enabling maximum ventilation. The cable is laid with spacers, ensuring flow through all layers. A single exhaust ensures control over the gas flow and safe environment for the surroundings.

The Carousel is based on a torsion box design for the deck, with radial arms connected to the torsion box. The deck is mounted onto a slewing bearing which enables the rotation of the deck. The slewing bearing is seated on a grillage. The grillage is again mounted onto a concrete foundation or similar. The slewing bearing is equipped with an external tooth rack that interconnects to the drive skid’s pinion. The Carousel is fitted with two circular walls: one outer wall which has the purpose of both restraining the cable stack and as a hot air distributor/inlet and an inner one which serves the
same purposes but works as an air outlet/collector.

 

Conductor Carousels

PASSER conductor carousels are based on a torsion box design for the deck, mounted onto a slewing bearing, which enables the rotation of the deck. The slewing bearing is seated on a grillage, which in turn is mounted onto a concrete foundation or similar. The slewing bearing is equipped with an external tooth rack that interconnects to the drive skid’s pinion.